Model/Brand/Package
Category/Description
Inventory
Price
Data
-
Category: Wiring terminal accessoriesDescription: SAKR Or directly feed in and single disconnect DKT4 SAKR type with round or concave head screw warning * Isolation terminal blocks can only be used for the isolated part of the circuit, used for testing. Do not use them to turn on or off the equipment when the power is turned on.14785+$17.787550+$17.0274200+$16.6017500+$16.49531000+$16.38882500+$16.26725000+$16.19127500+$16.1152
-
Category: Wiring terminal accessoriesDescription: SAKR Or directly feed in and single disconnect DKT4 SAKR type with round or concave head screw warning * Isolation terminal blocks can only be used for the isolated part of the circuit, used for testing. Do not use them to turn on or off the equipment when the power is turned on.404310+$10.3080100+$9.7926500+$9.44901000+$9.43182000+$9.36315000+$9.27727500+$9.208510000+$9.1741
-
Category: Wiring terminal accessoriesDescription: Motor Connection Terminal The ZMAK 2.5 is a 4 tier DIN rail mounted terminal allowing the user to connect a 3 phase motor using one single 5mm wide terminal. The terminal consists of 3 levels of feed-through connections, and a fourth level allowing earth continuity to the rail One of the smallest 3 phase connection terminals available Replaces 4 standard terminals Voltage Rating 500V Current rating 30 A Conductor Size 4mm2 (max) ### Z series56441+$80.725410+$77.2156100+$76.5838250+$76.0925500+$75.32031000+$74.96932500+$74.47805000+$74.0568
-
Category: Wiring terminal accessoriesDescription: Weidmuller End bracket WEW 35/1, used for TS 35 wiring terminal rail19865+$19.581150+$18.7443200+$18.2757500+$18.15861000+$18.04142500+$17.90755000+$17.82387500+$17.7402
-
Category: Wiring terminal accessoriesDescription: End Stop Screwless end stops, snap-on mounting at the end of an assembled rail. ### Z series408410+$10.1592100+$9.6512500+$9.31261000+$9.29572000+$9.22795000+$9.14337500+$9.075610000+$9.0417
-
Category: Wiring terminal accessoriesDescription: TS 35,Equipped with a screw clamp for securing screws, removed. The terminal components are molded from the same material as the wiring terminals and can be used to assemble the rails for installation at each end. *** * * Features and advantages * * Reliable installation on the terminal rail can prevent other terminal blocks and components from sliding with or without screws # # W series accessories185910+$9.0312100+$8.5796500+$8.27861000+$8.26352000+$8.20335000+$8.12817500+$8.067910000+$8.0378
-
Category: Wiring terminal accessoriesDescription: SAK TS35High quality range, industrial standard terminal design for installation on symmetrical TS35 (top cap type) DIN. The terminal block is made of polyimide 6.6, with a working temperature range of -50 ° C to+100 ° C, and complies with IEC60947-1. AP SAK terminal boards are available in 4 sizes for use with 2.5mm2 to 35mm2 terminal blocks. They are available in beige (* * RS 755-3725 * *) and blue (* * RS 718-0914 * *, * * RS 718-0923 * *, * * RS 718-0926 * *) and have a flammability rating of UL 94 V-2 # # # certified by CSA and UL, NEMKO,ATEX, And through IECEx39055+$27.242350+$26.0781200+$25.4261500+$25.26311000+$25.10022500+$24.91395000+$24.79757500+$24.6810
-
Category: Wiring terminal accessoriesDescription: RSF(Spring type terminal blocks meet the requirements of Class 1 terminal blocks specified in ESI 50-18 (original version ESI 12-1) standard. Each terminal can be connected to two hook shaped crimping terminals. The hook shaped plug is fixed in the slot inside the current rod behind the screw clamp, and the second plug is located below the screw clamp. ###The RSF jumper kit includes 1x 10 way jumper, 10 screws, and 10 washers. ###Recognizing CSA certification, ESI547210+$6.1344100+$5.8277500+$5.62321000+$5.61302000+$5.57215000+$5.52107500+$5.480110000+$5.4596
-
Category: Wiring terminal accessoriesDescription: ADO IDC Series # # ADO IDC Series84371+$69.596910+$66.5709100+$66.0262250+$65.6026500+$64.93691000+$64.63432500+$64.21075000+$63.8475
-
Category: Wiring terminal accessoriesDescription: SAK Series End Plate63925+$6.359925+$5.888850+$5.5590100+$5.4177500+$5.32342500+$5.20575000+$5.158510000+$5.0879
-
Category: Wiring terminal accessoriesDescription: 295-9106 Rated value is 20 A # # # Z series12885+$6.457125+$5.978850+$5.6439100+$5.5005500+$5.40482500+$5.28525000+$5.237410000+$5.1656
-
Category: Wiring terminal accessoriesDescription: Terminal markings These markings are blank or pre numbered and located on the side of the terminal. Parallel to rail reading. In addition, a fine tipped marker pen is also provided for use with blank cards. Stock number 129-2907 # # # indicates that terminal identification 705-9734 is supplied in 1-50, 2-cards, and terminal identification 394-829 is supplied in 51-100, 2-cards.28861+$52.070810+$49.0832100+$46.8637250+$46.5223500+$46.18081000+$45.79672500+$45.45535000+$45.2419
-
Category: Wiring terminal accessoriesDescription: SAK Series End Plate72455+$16.574250+$15.8659200+$15.4693500+$15.37011000+$15.27092500+$15.15765000+$15.08687500+$15.0160
-
Category: Wiring terminal accessoriesDescription: Test Adaptor System Quick and efficient testing of Weidmuller "W" series terminals is achieved with WTA adaptors. The spring legs mean they can be applied by "finger & thumb" pressure, ie no snap on points to break. Test cable of up to 1.5mm is fitted to the topside screw clamp terminal (WTA4 has two termination screws) facilitating easy assembly. Adaptors of the same type may be snapped together (as they are the same pitch as the terminals they fit) to make adaptor banks so that any number of consecutive terminals can be tested. Standard W series markers can be fitted for identification. Spring loaded test points Rated to 250V/6A Plastic locating feet grip terminal under test for secure fixing WTA 2 fits WDU2.5, WDU2.5ZR, WDU1.5ZZ WTA 3 fits WDU4 WTA 4 fits WDK2.5, WDK2.5V WTA 6 fits WDR2.5 ### W Series attachments61881+$86.757210+$82.9851100+$82.3061250+$81.7780500+$80.94821000+$80.57102500+$80.04295000+$79.5903
-
Category: Wiring terminal accessoriesDescription: WEIDMULLER AP 046056 Connector accessories, End Plate, Feed Through Terminal Blocks19435+$5.630925+$5.213850+$4.9218100+$4.7967500+$4.71322500+$4.60905000+$4.567210000+$4.5047
-
Category: Wiring terminal accessoriesDescription: WEIDMULLER WAP 2.5/10 BLACK Connector accessories, black, End/Intermediate Plate, DIN Rail Terminal Blocks47015+$3.410125+$3.157550+$2.9807100+$2.9049500+$2.85442500+$2.79125000+$2.766010000+$2.7281
-
Category: Wiring terminal accessoriesDescription: WEIDMULLER WDK2.5 COVER 105910 Connector accessories, End and Intermediate Plate, Terminal Blocks51465+$6.122325+$5.668850+$5.3513100+$5.2153500+$5.12462500+$5.01125000+$4.965810000+$4.8978
-
Category: Wiring terminal accessoriesDescription: WEIDMULLER EW35 Connector accessories, end caps, TS 35 DIN terminal blocks774310+$8.1324100+$7.7258500+$7.45471000+$7.44112000+$7.38695000+$7.31927500+$7.264910000+$7.2378
-
Category: Wiring terminal accessoriesDescription: SAK TS35High quality range, industrial standard terminal design for installation on symmetrical TS35 (top cap type) DIN. The terminal block is made of polyimide 6.6, with a working temperature range of -50 ° C to+100 ° C, and complies with IEC60947-1. AP SAK terminal boards are available in 4 sizes for use with 2.5mm2 to 35mm2 terminal blocks. They are available in beige (* * RS 755-3725 * *) and blue (* * RS 718-0914 * *, * * RS 718-0923 * *, * * RS 718-0926 * *) and have a flammability rating of UL 94 V-2 # # # certified by CSA and UL, NEMKO,ATEX, And through IECEx95455+$24.351250+$23.3106200+$22.7278500+$22.58211000+$22.43642500+$22.26995000+$22.16587500+$22.0618
-
Category: Wiring terminal accessoriesDescription: WEIDMULLER C905266600 END PLATE, FOR ST25 / EN TYPE TERMINAL BLOCKS542510+$8.7360100+$8.2992500+$8.00801000+$7.99342000+$7.93525000+$7.86247500+$7.804210000+$7.7750
-
Category: Wiring terminal accessoriesDescription: WEIDMULLER 011796 AP (SAK4/6) Connector accessories, 1.5mm wide, End and Intermediate Plate, SAK71915+$5.042325+$4.668850+$4.4073100+$4.2953500+$4.22062500+$4.12725000+$4.089810000+$4.0338
-
Category: Wiring terminal accessoriesDescription: WEIDMULLER 029446 AP Connector accessories, End Plate, Modular Terminals378610+$8.3544100+$7.9367500+$7.65821000+$7.64432000+$7.58865000+$7.51907500+$7.463310000+$7.4354
-
Category: Wiring terminal accessoriesDescription: WEIDMULLER WAP 2.5/10 ORANGE Connector accessories, End/Intermediate Plate, DIN Rail Terminal Blocks10095+$3.609925+$3.342550+$3.1553100+$3.0751500+$3.02162500+$2.95485000+$2.928010000+$2.8879
-
Category: Wiring terminal accessoriesDescription: WEIDMULLER 019132 AP (SAKS3) Connector accessories, End Plate, SAKS1 and SAKS3 Fuse Terminals701110+$7.5612100+$7.1831500+$6.93111000+$6.91852000+$6.86815000+$6.80517500+$6.754710000+$6.7295
-
Category: terminal identificationDescription: ZAD Series hazard warning label outer cover21971+$1751.181310+$1735.261525+$1727.301650+$1719.3416100+$1711.3817150+$1703.4218250+$1695.4619500+$1687.5020
-
Category: terminal identificationDescription: Connector Accessories Connector Marker Polyamide 66 White50431+$473.585010+$461.230650+$451.7589100+$448.4644200+$445.9935500+$442.69901000+$440.63992000+$438.5808
-
Category: Wiring terminal accessoriesDescription: Conn Ground Terminal Block ST T DIN Rail40671+$109.927410+$105.1479100+$104.2876250+$103.6185500+$102.56701000+$102.08912500+$101.41995000+$100.8464
-
Category: Wiring terminal accessoriesDescription: END PLATE 5MM WIDE ORANGE87735+$16.395250+$15.6946200+$15.3022500+$15.20411000+$15.10602500+$14.99395000+$14.92387500+$14.8538
-
Category: Wiring terminal accessoriesDescription: WThe screw series and screw free Z series DIN mounting terminals provide a top access system, saving time and space. Quick and easy installation, as the use of a clamping system simplifies the insertion of wires. The top access system means that the wire access and clamp operation access come from the same direction. Given a continuous rated temperature of 120 ° C, they self extinguish to UL94V-0. Providing sizes of 2.5, 4, 6, 10, and 16mm, these terminal blocks are particularly suitable for enclosed spaces as the top access system saves time and space, and meets the requirements for wire access and clamp operation access from the same direction. Regarding the 2 and 10 circuit jumpers, please refer to the attachment later. ###The ZDU 10 and ZDU 16 wiring terminals are only certified by CSA and UL. ###Recognized CSA certification, UL certification, SEV, KEMA 00 ATEX 2107U, NEMKO, Lloyds classification society, SETI # # # Z series997810+$1.341950+$1.2723100+$1.2226300+$1.1928500+$1.16301000+$1.13322500+$1.08845000+$1.0785
